Energy-Optimal Technologies, Logistic and Safety on Transport

Lviv, Ukraine, 19 - 20 september 2019

Slider

Materials of the conference are going to be published in one of two magazines:

  • In MATEC Web of Conference, a publication which is being indexed in leading scientometric databases including Web of Science (further - MATEC);
  • In the conference digest EOT Journal (further – EOT), which is planned to be published before the conference. 

 

Requirements for publications in MATEC

MATEC accepts for publication only articles written in English which contain 6-8 pages including summary and the list of used sources. The articles must be arranged according to the following requirements:

The articles should be typed in the editor MS Word and saved in .doc format. Page layout options: Paper size – A4 (210 x 297 mm); margins: top – 25 mm, Bottom, Left and Right – 20 mm.

Formatting the title: The title is set in bold 16-point Arial, justified. The first letter of the title should be capitalised with the rest in lower case. You should leave 35 mm of space above the title and 6 mm after the title.

Formatting author names and author affiliations: The style for the names is First Name, typed in italic 10-point Times, then Last Name, typed in 10-point Times, with a comma after all except the last author, which is separated by comma + “and”. Do not use academic titles.

Affiliations of authors should be typed in 9-point Times. They should be preceded by a numerical superscript corresponding to the same superscript after the name of the author concerned. Please ensure that affiliations are as full and complete as possible and include the country.

Formatting the Abstract: You should leave 8 mm of space above the abstract and 10 mm after the abstract. The heading Abstract should be typed in bold 9-point Times. The body of the abstract should be typed in normal 9-point Arial in a single paragraph, immediately following the heading. The text should be set to 1 line spacing. The abstract should be centred across the page, indented 17 mm from the left and right page margins and justified. It should not normally exceed 200 words.

Formatting the text: Use a two-column format, and set the spacing between the columns at 8 mm. Do not add any page numbers.

The text of your paper should be formatted as follows:

  • 10-point Times, Times Roman or Times New Roman.
  • The text should be set to single line spacing.
  • Paragraphs should be justified.
  • The first paragraph after a section or subsection should not be indented; subsequent paragraphs should be indented by 5 mm.

The use of sections to divide the text of the paper is optional and left as a decision for the author. Where the author wishes to divide the paper into sections, use the following parameters:
For section: Font – Arial bold 12-point, Spacing –6 mm before and 3 mm after, Numbering – 1, 2, 3, etc.;
For subsection: Font – Arial bold 10-point, Spacing – 6 mm before and 3 mm after, Numbering – 1.1, 1.2, 1.3, etc.;
For subsubsection: Font – Arial Italic 10-point, Spacing – 6 mm before and 3 mm after, Numbering – 1.1.1, 1.1.2, 1.1.3, etc.

Figures and tables, as originals of good quality and well contrasted, are to be in their final form, ready for reproduction, pasted in the appropriate place in the text. Try to ensure that the size of the text in your figures is approximately the same size as the main text (10 point). Try to ensure that lines are no thinner than 0.25 point.

Captions/numbering: Captions should be typed in 9-point Times. They should be centred above the tables and flush left beneath the figures.

Place the figure as close as possible after the point where it is first referenced in the text. If there is a large number of figures and tables it might be necessary to place some before their text citation. If a figure or table is too large to fit into one column, it can be centred across both columns at the top or the bottom of the page.

You are free to use colour illustrations for the online version of the proceedings but any print version will be printed in black and white. Check your figure captions carefully and remove any reference to colour in the illustration and text. In addition, some colour figures will degrade or suffer loss of information when converted to black and white, and this should be taken into account when preparing them.

Equations and mathematics: Equations should be centred and should be numbered with the number on the right-hand side.

Use italics for variables (u) and bold (u) for vectors. The order for brackets should be {[()]}, except where brackets have special significance.

The acknowledgements should be typed in 9-point Times, without title.

References should be cited in the text by placing sequential numbers in brackets (for example, [1], [2, 5, 7], [8-10]). They should be numbered in the order in which they are cited. A complete reference should provide enough information to locate the article.

Online references will be linked to their original source, only if possible. To enable this linking extra care should be taken when preparing reference lists.

References to printed journal articles should typically contain:

  • The authors, in the form: initials of the first names followed by last name (only the first letter capitalized with full stops after the initials),
  • The journal title (abbreviated),
  • The volume number (bold type),
  • The article number or the page numbers,
  • The year of publication (in brackets).

Authors should use the next font styles for a reference to a journal article:
Authors – Normal, Initials followed by last name; Journal title – Normal Abbreviated; Book title, Proceedings titleItalic; Volume numberBold; Page number – Normal; Year – Normal (In brackets).

Here are some examples:

  1. A. Mecke, I. Lee, J.R. Baker jr., M.M. Banaszak Holl, B.G. Orr, Eur. Phys. J. E 14, 7 (2004)
  2. M. Ben Rabha, M.F. Boujmil, M. Saadoun, B. Bessaïs, Eur. Phys. J. Appl. Phys. (to be published)
  3. Luigi T. De Luca, Propulsion physics (EDP Sciences, Les Ulis, 2009)
  4. F. De Lillo, F. Cecconi, G. Lacorata, A. Vulpiani, EPL, 84 (2008)

The template of the article arranged according to the requirements listed above in MS Word format can be downloaded at:  MATEC woc_2col.doc

All articles which will pretend to publication in MATEC edition will pass external review by two international reviewers. After the review one of the following decisions will be made:

  • Accepting for publication in MATEC edition;
  • Accepting for publication in MATEC edition after making changes and additions according to reviewers’ remarks;
  • Accepting for publication in EOT conference digest;
  • Accepting for publication in EOT conference digest after making changes and additions according to reviewers’ remarks;
  • Rejecting the article from publication with explaining reasons of such decision.

 Summaries of articles which will be published in MATEC must be submitted up to June 16, 2019 via links from official webpage of the conference. The term of submitting articles is July 14, 2019.

 
Requirements for publication in EOT conference digest

EOT conference digest accepts for publication articles which are written on working languages of the conference (English, Ukrainian or Polish) with summary in English. Articles must contain 2-8 pages including summary and the list of used sources. Other requirements are similar to those previously stated.

Template of the article arranged according to the requirements in MS Word format can be downloaded here
   EOT woc_2col_укр.doc (In Ukrainian) 
   EOT woc_2col_en.doc (In English)

EOT conference digest will also publish articles which would be rejected for MATEC publication by scientific committee but would simultaneously be recommended for publication in EOT digest, publications of authors who decided to publish their articles in EOT digest only and authors who will participate in the conference in absentia.

Articles intended for publication in EOT conference digest must be submitted before September 10, 2019 by sending them to E-mail of the organizing committee of the conference This email address is being protected from spambots. You need JavaScript enabled to view it. with subject „For EOT Publication”. This requirement does not apply for articles submitted for MATEC but recommended for publication in EOT digest if their authors agreed for that.

Articles which will pretend to publication in EOT digest will pass internal review by scientific committee. After the review one of two following decisions will be made:

  • Accepting for publication in EOT conference digest;
  • Accepting for publication in EOT conference digest after making changes and additions according to reviewers’ remarks;
  • Rejecting the article from publication with explaining reasons of such decision.